dlink problem?

jw_2101 · #1 11-14-2002, 08:05 AM

Hi I have a d-link 1000ap access point connected to a baricade non wifi router. All things worked till last week... I did nothing...nothing!!! But now only the baricade's wired connections work. Both my symbol and cisco wifi pc cards dont work. The singnal strength is 100% but the signal quality is near 0. Is this a problem with the AP? I run 2 notebooks wireleessly and all m,y comps use winxp.

regds
Jonathan

Greenstead · #2 11-15-2002, 10:15 PM

Try a hard reset on the AP and reconfigure it (there's a very small button on it somewhere to reset it). Then reconfigure as needed. If that doesn't fix it then I would suspect it has failed.