recurring 'application hang' error, event id 1002

[JodyMac12]

Hey y'all -

i keep getting this error - not always with MSACCESS, but usually with one of the MSOFFICE programs. my theory is that it is a network problem, not an MSOFFICE problem, but i've searched the internet and can't find a solution...i have tried updating the network drivers at the work stations and at the computer that acts as a server, but that did not help. all the machines in the network run win xp pro, and are connected with a linksys router & hub combination. this error doesn't necessarily happen every day but it seems to happen the most regularly on one computer, occassionally on another, and rarely on the other 3. the following error shows up in the 'application' error log; the other events that show up regularly are shown below, and they show up in the 'system' error log...any help would be greatly appreciated...J
__________________________________________________ _______________
Event Type: Error
Event Source: Application Hang
Event Category: (101)
Event ID: 1002
Date: 2/8/2007
Time: 2:17:33 PM
User: N/A
Computer: STATION1
Description:
Hanging application MSACCESS.EXE, version 10.0.6771.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 48 61 6e 67 ion Hang
0010: 20 20 4d 53 41 43 43 45 MSACCE
0018: 53 53 2e 45 58 45 20 31 SS.EXE 1
0020: 30 2e 30 2e 36 37 37 31 0.0.6771
0028: 2e 30 20 69 6e 20 68 75 .0 in hu
0030: 6e 67 61 70 70 20 30 2e ngapp 0.
0038: 30 2e 30 2e 30 20 61 74 0.0.0 at
0040: 20 6f 66 66 73 65 74 20 offset
0048: 30 30 30 30 30 30 30 30 00000000

__________________________________________________ _______________

Event Type: Warning
Event Source: Dhcp
Event Category: None
Event ID: 1003
Date: 2/21/2007
Time: 6:00:42 AM
User: N/A
Computer: STATION1
Description:
Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 001676BD6FBD. The following error occurred:
The semaphore timeout period has expired. . Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 79 00 00 00 y...

__________________________________________________ _______________

Event Type: Error
Event Source: Dhcp
Event Category: None
Event ID: 1002
Date: 3/5/2007
Time: 8:15:47 AM
User: N/A
Computer: STATION1
Description:
The IP address lease 192.168.2.101 for the Network Card with network address 001676BD6FBD has been denied by the DHCP server 192.168.2.1 (The DHCP Server sent a DHCPNACK message).

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

[Greenstead]

No idea.
Have you tried using the links in the errors:
http://go.microsoft.com/fwlink/events.asp.

[JodyMac12]

Thanks for the response, Green...

yes, i have tried those links, but they are not helpful - they say 'no user action is required'...any suggestions as to where i might try to find a solution next?

[Greenstead]

I doubt it is network related.

When you abort the task it should ask to send a report to MS. If you allow it then sometimes there will be an immediate response with a potential cause/fix for the problem.