Linksys BEFW11S4 Won't Connect

[mstrauss]

Hi,

I have a IBM T42 laptop with XP Pro service pack 2 and an Intel(R) PRO/Wireless 2915ABG Net wireless card installed. I am trying to get it to work with my Linksys router (BEFW11S4 v3). I have the most recent firmware installed on the router. The laptop "sees" the router, I can see the SSID and have excellent signal strength. When I try to connect, the connection is lost after a minute or so or it will not connect at all.

Here are the ipconfig /all settings when I do have a connection:

Dhcp Enabled: Yes
Autoconfiguratoin Enabled: Yes
IP Address: 192.168.1.104
Subnet Mask: 255.255.255.0
IP Address: fe80::213:ceff:fe45:d81f%4
IP Address: 192.168:1:1
Default Gateway: 192.168:1:1
DHCP Server: 192.168:1:1
DNS Servers: 192.168:1:1
fec0:0:0:ffff:1%1
fec0:0:0:ffff:2%1
fec0:0:0:ffff:3%1

Tunnel Adapter Teredo Pseudo-Interface:
Connection Specific DNS Sufix:
Description: Tunnel Adapter Teredo Pseudo-Interface
Physical Address: FF-FF-FF-FF-FF-FF-FF-FF
Dhcp Enabled: No
Ip Address: fe80:5445:5245:444f%6
Default gateway:
NetBIOS over TCPip: Disabled

Tunnel Adapter Automatic Pseudo-Interface:
Description: Tunnel Adapter Teredo Pseudo-Interface
Physical Address: C0-A8-01-68
Dhcp Enabled: No
IP Address: fe80:5efe:192.168.1.104%2
Default gateway:
DNS Servers: fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip: Disbled

Any suggestions would be greatly appreciated.

Thanks

[cszeto]

http://forums.practicallynetworked.com/showthread.php?t=1584

[mstrauss]

cszeto,

Thanks for the link/info. I tried changing the channel and the Enable 802.1x authentication is *not* checked....still cannot connect.

Thanks,
Mike

[cszeto]

http://forums.practicallynetworked.com/showthread.php?t=2243
http://forums.practicallynetworked.com/showthread.php?t=3266
http://forums.practicallynetworked.com/showthread.php?t=3636